Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
Recommended PCD and Carbide Grades Non-Ferrous MetalNonM-Feetarrllous
Grades DA1000 Insert
Selection
Ultra-high-density sintered, ultra-fine diamond particles
Significantly improved surface roughness on machined surfaces
World’s best wear resistance and strength
Suitable for use with all aluminium and non-ferrous alloys
l DA1000 Wear Resistance
l Comparison of Surface Roughness of Nose Radius Cutting Edge
DA1000 Conventional Grade
Cutting Speed (m/min) Excellent Surface Bad Surface
Fine Edge Rough Edge
Lifetime (min) Insert: TPGW 160308
Cutting Conditions: vc=1000m/min, f=0,15mm/rev, doc =0,2mm, Wet
l Wear Resistance in Turning Applications
l Wear Resistance in Milling Applications
Conventional Grade
Competitor‘s PCD
DA1000
Cutting Distance (km)Flank Wear Width (min) Flank Wear Width (min) Conventional Grade
Insert: TPGN160304
Cutting Conditions: vc=800m/min, f=0,12mm/rev, doc =0,5mm, Wet DA1000
Number of Passes
Insert: SNEW1204 ADFR-NF
Cutting Conditions: vc=2000m/min, f=0,15mm/rev, doc =3,0mm, Wet
Application Examples
H1 + NAG Type Breakers DA1000
ADC12 Aluminium Wheel Copper Alloy Bush
Excellent adhesion resistance. Stable surface roughness with no edge breakage (3,2S).
Longer tool life. Tool life improved to 3x that of conventional models.
No. of Workpieces500 - 3.000 -
Output (pcs) / Cutting edge5002x 2,0x tool life 3,000 3,0x tool life
Output (pcs) / Cutting edge 2.000 -
- tool life
2,000
250 -
1.000 -
250 1,000
-
0 0 CHom1petitor'Cs ompetitor's 0 0DA(DN1AF01)00000 Competitor's
H1 Product
AG (NAG) Product
Insert: VCGT160408 NAG (H1) Insert: TPGN160308 NF (DA1000)
Cutting Conditions: vc=2000m/min, f=0,25mm/rev, doc =2,0mm, Wet Cutting Conditions: vc=300m/min, f=0,07mm/rev, doc =0,08mm, Wet
www.sumitomo-tools.ru A29
для заказа - sumitomo@sumitomo-tools.ru