Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
For the Smooth and Reliable Cutting Action of Aluminium Wavemill Series
WAX Type
Overview
Based on our proven Wavemill design this new range of WAX
cutters is capable of rough and finishing Aluminium Alloys and
other Non Ferrous Metals. It is ideal for high productivity Aluminium
machining to exacting tolerances in the Aircraft, Electronics,
and Automotive industries. The award winning Auroracoat DLC
(diamond like carbon) inserts resist chip adhesion and substantially
increase both tool life and productivity when dry machining
Aluminium helping customers boost compliance with ISO14001
accreditation standards
Advantages l High Productivity
l Dry machining capability
with MQL system
l DLC (diamond like carbon) inserts
l True 90 degree shoulder milling
l Chip adhesion resistance
l Wide range of nose radius
Ramping (Slant Milling) WAX3000 E/EL Type (mm)
Maximum ramping angle (a max. max.) depends on cutter diameter. Cutter Diameter Ramping Angle Depth- of Cut Milling Distance
a max.
Minimum milling length (L min) is the ramping distance required to reach the maximum D doc max. L min.
cutting depth (doc max) at the maximum ramping angle of that cutter. 20 8° 10 72
Minimum milling length (L) for any depth can be calculated by the equation below:
25 17° 10 33
32 12° 10 47
40 9° 10 64
L doc
L= tan a (mm)
WAX3000 RS Type (mm)
Cutter Diameter Ramping Angle Depth- of Cut Milling Distance
a max.
D doc max. L min. Indexable
Endmills
50 7° 10 82
a 60 5° 10 115
Helical Milling doc 80 3° 10 191
D1 100 3° 10 191
125 2° 10 287
Helical Milling Diameter (mm)
Cutter Diameter Milling Diameter D1
D Min. Max.
20
22 33
25 29 43
32 43 57
40 59 73
50 79 93
D 63 105 119
80 139 153
100 179 193
125 229 243
Maximum Allowable Spindle Speed
Cutter Diameter Spindle Revolution Cutting Speed
D n (min-1) vc (m/min)
20 14.000 880
25 29.000 2.200
32 25.000 2.500 Recommended Cutting Conditions
40 23.000 2.900
50 20.000 3.100 Work Material Aluminum Alloy
Cutting Speed 600 ~ 1.200 m/min
63 18.000 3.500
80 16.000 4.000
100 14.000 4.400 Feed Rate 0,05 ~ 0,25 mm/tooth
125 13.000 5.100
www.sumitomo-tools.ru H21
для заказа - sumitomo@sumitomo-tools.ru