Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
”Sumi Power Mill”
PWC Type
High Metal Removal
High Volume Insert Capacity
High Performance Inserts
Geometry Advantages Milling Cutters
Rake angle l High volume insert capacity
G type : 20° The tangential orientation of the strong carbide inserts increases the
H type : 15° number of cutting edges (eg 3 edges /inch) maximising edge contact
with the workpiece.
Inserts
l Cost effective tooling
Using M Class precision sintered inserts with 8 cutting edges both
acquisition and operating costs are substantially reduced.
l Increased tool life
New Cast Iron grades ACK200 for general cutting and ACK300 for
heavy cutting provide increased tool life and high productivity
l Durable cutter body
The robust cutter body is manufactured from a special alloyed steel
then coated with a hard surface to resist swarf damage, scratching,
and corrosion.
Wiper width = 2,4 mm
G type insert H type insert
for light cutting with strong cutting edge
(Fig. 1) (Fig. 2)
Cat. No. Nose CVD Coated PVD Coated Fig. Application Remark
Radius
LNMX 160608 PNSN-G ACK100 ACK200 ACK300
LNMX 160608 PNSN-H
0,8 l l 1 General application First remommendation
0,8 l l 2 Instable machining Suitable for instable
Heavy interruption condition
New Coated Grade for Cast Iron
Wear Resistance (Good) Gold colour Cast Iron (K) (GG, GGG) Grade Characteristic · Application
High wear resistance with special hard substrate
ACK100 Copper colour K 01 K 10 K 20 K 30 K 40 ACK100 and fine Ti-based Al2O3 CVD coating for high speed
AC K100 ACK200 machining
AC211 ACK200 ACK300 Excellent wear resistance with fine Ti-based and tough
High speed cutting Al2O3 CVD coating
ACK300 AC K200 Excellent toughness with fine grain carbide substrate.
General cutting Cr added new PVD coating could improve hardness
ACZ310 AC K300 and oxidation resistance.
General to heavy cutting
G37
Chipping Resistance (Good)
www.sumitomo-tools.ru
для заказа - sumitomo@sumitomo-tools.ru