Sumitomo - Полный каталог инструмента - 2016 EN
Wave Radius Mill для заказа - sumitomo@sumitomo-tools.ru
WRCX Type High Durable Mill with Polygon Inserts
Grades for Steels, Cast Iron and Aluminium
Features
The ”Wave Mill” WRCX type is a new multi purpose milling cutter for face milling, slotting,
helical boring, plunging and profiling. Its unique design features 16 corner polygon inserts and
a durable cutter body manufactured from high tensile alloyed steel protected by a hard
surface treatment. Insert rigidity is maximised via close tolerance seat pockets and centre
clamped using a torxscrew . Choose from a variety of insert grades such as our award
winning Diamond like Carbon DL 1000 capable of high feed machining aluminium, our
uncoated H1 grade suitable for non-ferrous metals or our new ACP/ACK grades for steels
and irons.
Advantages l Durable cutter body – Special alloyed steel with hard surface.
l High feed cutting – Optimised pitch and high number of cutting edges
l Excellent chip removal – Wide pocket and integral coolant hole
l Maximum rigidity – Rigid clamping of inserts with TORXPLUS screw
l Wide application range – Carbon steels, alloy steels, stainless steels, high temperature alloys,
diemould steels, aluminiums, non-ferrous metals etc
Insert
QPMT... : Standard 16 cornered polygon type QPET...- S : Polished round insert for non-ferrous material
QPMT...- H : Stronger cutting edge type
Fig. 2 Rake angle: 25°
Fig. 1 4 corners use
R : wiper radius
Milling Cutters Cat. No. Coated Carbide Diamond Uncoated r s Max. doc Fig. Applicable Cutter
Coated Carbide IC 4 corners 8 corners WRCX/-F 12000 RS
QPMT 120440 PPEN application application WRCX/-F/-X 16000 RS
QPMT 120440 PPEN-H ACP100 ACP200 ACP300 ACK200 ACK300 DL1000 H1 (mm) (mm) (mm) WRCXF 20000 RS
QPET 120460 PPFR-S
QPMT 160660 PPEN l l l l l l l 12 64,,00 4,7 6 5,6 1–,5 uv
QPMT 160660 PPEN-H l l l l l
QPET 160680 PPFR-S
QPMT 200670 PPEN
QPMT 200670 PPEN-H l l l l l 16 6,0 6,5 7,6 2,1 u
l l l l l
l l 8,0 – v
l l l l l 20 7,0 6,5 9,4 2,5 u
l l l l l
Anti-Vibration Type (Paired Sets for Vibration Free Machining)
Type Type
08 CP
Cat. No. Coated carbide Diamond Uncoated IC r s Max. doc Insert Applicable cutter
coated carbide 4 corners 8 corners type WRCX/-F/-X 16000 RS
QPMT 160608 PPEN application application WRCXF 20000 RS
QPMT 160608 PPEN-CP ACP100 ACP200 ACP300 ACK200 ACK300 DL1000 H1 (mm) (mm) (mm) 08
QPMT 200608 PPEN CP
QPMT 200608 PPEN-CP l l l l l 1,2 08
l l l l l 16 0,8 6,5 7,6 CP
2,3
l l l l l 1,6
l l l l l 20 0,8 6,5 9,4
2,9
The combination of different Chip Formation
inserts in a staggered Anti-vibration Type Standard Type
formation varies the cut
depth and eliminates
vibration when feed rate is
ft < 0,15 (IC=16 mm) CP and 08 Work Material: 50C
or type inserts
ft < 0,2 (IC=20 mm). are Cutting Data: ft = 0,1mm/tooth, doc = 7 mm
used in pairs
Insert Size: IC = 20 mm
G18 l = Euro stock www.sumitomo-tools.ru
q = Delivery on request для заказа - sumitomo@sumitomo-tools.ru