Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
Face Mill
DNX /DNXF Type
Features
l Small inserts with 8 cutting edges
l Economic by double-side usage
l Excellent grade for cast iron machining
l Optimised geometry for best results in cast iron
l Special inserts for steel machining
Insert
Cat. No. Coated Carbide Fig. 1 Fig. 2 Fig. 3
Fig. G Type H Type SH Type
SNMT 1205 ZNEN-G
SNMT 1205 ZNEN-H ACP200 ACP300 ACK100 ACK200 ACK300 12,7
SNMT 1205 ZNEN-SH 12,7
12,7
l l l l 1
12,7 5,6 12,7 5,6 12,7 5,6
l l l l 2 Cutting edge Flat land Flat land
l q l l l 3
G Type : For general purpose
H Type : For heavy machining
SH Type : For steel machining
NIAnpespgelaricttsiavwbelietinhfso8errcstustetteinl gmeadcgheinsing Milling Cutters
l
l
l
Advantage of SH-Type when Steel machining SH Type
G Type Smooth chip evacuation
reduces cutting forces !
Chip packing causes
higher cutting forces !
Recommended Cutting Conditions [vc = m/min, ft = mm/ tooth] [min.– optimum – max.]
ISO Work Material Hardness (HB) Cutting Speed Feed Rate Insert Grade
vc (m/min) ft (mm/tooth)
Carbon steel 180 - 280 150 - 175 - 200 0,10 - 0,15 - 0,20 ACP200
180 - 280 150 - 175 - 200 0,10 - 0,15 - 0,20 ACP200
P 150 - 225 - 300 0,10 - 0,20 - 0,30 ACK200 / ACK300
250 150 - 225 - 250 0,10 - 0,18 - 0,25 ACK200 / ACK300
Alloy steel 250
Grey cast iron (GG)
K
Ductile cast iron (GGG)
www.sumitomo-tools.ru G17
для заказа - sumitomo@sumitomo-tools.ru