Sumitomo - Полный каталог инструмента - 2016 EN

                                                                                  для заказа - sumitomo@sumitomo-tools.ru

             Radius Endmill for Exotic Alloys

             SSEH Series

                                                                        + J 24, J 41                                                                        + J 23, J 41

             SSEH Radius                                                                                   SSEH Radius Anti-vibration Type

             n Characteristics and Applications                                                            n Characteristics and Applications

             l Steep helix (45° helix) improves sharpness.                                                 l New anti-vibration type added to the SSEH type endmill for
             l Combination of unique flute design and semi-mirrored surface                                   exotic alloys.

                improves chip evacuation and adhesion resistance.                                          l Builds on the same features of existing endmills by adding an
             l Ultra-smooth coating with improved hardness and heat                                           irregular lead for exceptionally good anti-vibration performance.

                resistance combined with tough carbide substrate improves tool                             l Compatible with wide range of milling for exotic alloys including
                life when working with heat resistant alloys.                                                 SUS, Inconel, and titanium.
             l Unique, smooth radius shape mitigates cutting impact and
                improves fracture resistance.                                                              l Reduces chattering for high-speed, high-feed cutting.
             l Both coated and uncoated types are available in stock to meet                               l Both coated and uncoated types are available in stock to meet
                various conditions.
                                                                                                              various conditions.

             n Application Examples                                                                                Irregular Pitch    + Irregular Lead
             l Inconel 718 (Side Milling)                                                                  a1° a2°                         b2°

                                            Chipping        Conventional Tool                                                        b1°

             Notch Wear (mm)

                                                                                                           n Application Examples

Coated                                         Cutting Length (m)                                          l Surface Roughness Comparison
   Endmills
                              Tool Diameter:	  6R1                                                       SSEH Anti-vibration Type

                              Cutting Conditions:	 vc = 20 m/min, ft = 0,025 mm/t,                                                   Good Surface Quality
                                                                                                                                                Ra 0,37m	
                              	doc = 5 mm, woc = 0,5 mm, wet                                                                                                Rz 1,86m

             l Inconel 713 (Side Milling)
               SSEH 4100W-R10 Competitor's Product

                                                                                                           Conventional Tool         Surface shows chattering
                                                                                                                                                Ra 1,52m	 Rz 6,45m

             Tool Diameter :	  10xR1

             Cutting Conditions : 	 vc= 32 m/min, ft = 0,018 mm/t

             	doc = 20 mm, woc =0,8m, Dry

             In Sumitomo Electric Hardmetal tests, the special coating with excellent adhesion resistance  Work Material:	           X5CrNi1810 (Surface Milling)
             provided less cutting edge adhesion than the competitor's product and enabled fracturefree
             machining.                                                                                    Tool Diameter:	           12mm
             The competitor's product suffered from edge adhesion leading to breakage.

                                                                                                           Cutting Conditions:	n = 1.300 rpm, vf = 300 mm/min

                                                                                                           	doc = 18 mm, woc = 1,2 mm

                              Unique, smooth radius design                                                 Equipment: BT50

J22                           l = Euro stock                                     www.sumitomo-tools.ru
                              q = Delivery on request               для заказа - sumitomo@sumitomo-tools.ru