Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
NEW "Global Standard" Endmills
GSX MILL Series
Large rake angle and unique flute design improve sharpness and
excellent chip evacuation.
n Product Range
No. of Flute Length
Teeth
Application 1,5 D 2D 3D 4D
C Type C Type C Type
GSX20000C-1.5D S Type C Type GSX20000C-3D GSX20000C-4D
aJ7 GSX20000S-2D GSX20000C-2D a J 10 a J 11
2 Flutes GSX30000C-1.5D GSX40000C-3D GSX40000C-4D
a J 12 aJ8 aJ9 a J 18 a J 19
General GSX40000C-1.5D GSX30000C-2D
Purpose
3 Flutes a J 15
GSXSLT30000C-1.5D GSX40000S-2D a J 13
a J 14 GSX40000C-2D
4 Flutes
a J 16 a J 17
Compound 3 Flutes
Endmilling
n Multi-Purpose "GSX-SLT" Slot Type Drilling and ... GSX SLT
3000C-1.5D
l Optimized flute design of slotted 3 flute (1.5D) short Slot
type reduces cutting resistance. milling
j Allows drilling and slot milling and other continuous (compound)
applications.
k Perfect for use with thin sheets and small machining centres
n Application Examples Coated
Endmills
l Carbon Steel Grooving with GSX20000C l Cast Iron Grooving with GSX20000C
GSX 20000C Competitor Gash land for stronger cutting edge. GSX 20000C Competitor GSX coating for improved wear resistance.
Tool dimension 6 (2 Flutes) Tool dimension 10 (2 Flutes)
Work material C50 Work material GGG60
Cutting speed vc = 87 m/min Cutting speed vc = 66 m/min
n = 4615 rpm n = 2100 rpm
Feed rate ft = 0,06 mm/teeth Feed rate ft = 0,072 mm/teeth
vf = 553 mm/min vf = 302 mm/min
Depth of cut doc = 3 mm Depth of cut doc = 5 mm, 5 passes
Wide of cut woc = 6 mm Wide of cut woc = 10 mm
Breakage Cooland Dry High Wear Cooland Dry
Vertical machining centre (BT50) Vertical machining centre (BT40)
l Stainless Steel Machining with GSX20000C l Surface Milling C50 with GSX20000S
GSX 20000C Competitor Improved reliability even under wet machining. GSX 20000S Competitor S type delivers optimum cutting performance.
Tool dimension 10 (2 Flutes) Tool dimension 6 (2 Flutes)
Work material X5 CrNi 1812 Work material C50
Cutting speed vc = 50 m/min Cutting speed vc = 87 m/min
n = 1591 rpm n = 4615 rpm
Feed rate ft = 0,04 mm/teeth Feed rate ft = 0,06 mm/teeth
vf = 27 mm/min vf = 553 mm/min
Depth of cut doc = 10 mm Depth of cut doc = 10 mm
Wide of cut woc = 0,5 mm Wide of cut woc = 0,3 mm
Coating peel off Cooland Wet Chipping Cooland Dry
Vertical machining centre (BT50) Vertical machining centre (BT50)
www.sumitomo-tools.ru J5
для заказа - sumitomo@sumitomo-tools.ru