Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
Wave Repeater Mill
WRX Type
General Features
The WRX Wave repeater end mill system features AXMT
style inserts vertically mounted and positioned to provide
a long continuous cutting edge suitable for deep shoulder
milling. Designed to run at elevated feed rates the soft
cutting action reduces cutting resistance, vibration and
noise to substantially improve tool life and surface finish.
Available with our new generation Super FF and Super ZX
coated inserts for unbeatable performance.
Product Range
l WRX 2000 series with 12 mm inserts
l WRX 3000 series with 17mm inserts
l Cutter Diameters - 20mm (doc = 18mm) to 100mm (doc = 53mm)
l Special Order Options – WRX Cutter with integrated arbor
Shell type with detachable head
l Wide ISO Application Range – P/M/K/N classification
Advantages
l Optimised insert positions reduce cutting resistance and vibration
l Integral coolant improves chip flow
l Primary chip slot for smooth and fast chip evacuation
l Optimised insert pocket maximises rigidity
l Bottom edge support improves tool life and cutting performance
Special
pocket shape
Indexable Lead Axial insert
Endmills groove supporting
system
Cutting Resistance Comparison Cutting Force Vibration ComparisonVibration Amplitude Vibration Amplitude Low
Components: Vibration
Cutting resistance Principle force WRX
reduced by 30% Feed force Time
Back (+) force
Cutting Resistance (N) Back (–) force
Competitor Time
WRX Competitor
Work Material: C50 Work Material: C50
Tool: WRX2025RH27E25 Tool: WRX3080RH53F32
Cutting Conditions: vc = 100m/min, f t = 0,15mm/tooth Cutting Conditions: vc = 150m/min, f t = 0,15mm/tooth
doc = 25mm, woc = 10mm, Dry doc = 25mm, woc = 10mm, Dry
H26 l = Eurostock www.sumitomo-tools.ru
q = Delivery on request для заказа - sumitomo@sumitomo-tools.ru