Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
Wave Radius Mill
RSX Series
Low Cutting Resistance, Less Vibration High Operability
Low cutting resistance and low vibration machining Ease of corner control has been achieved with the
have been achieved with super high rake angle de- adoption of a unique positioning mechanism that is
sign + high rigidity body. highly precise and highly operable.
High rake angle design A significant increase in back metal thickness Contact area
Highly durable body R-shaped pocket Locator
Insert size of 12 and 16mm uses a maximum of 8 corners
and an insert size of 10mm uses a maximum of 4 corners.
Stable and Long Tool Life Fracture Resistance A long life ensured with the adoption of the ACM series
and significant improvements have been made in pro-
Work cessing exotic alloy and stainless steel machining.
Material Wear Resistance
P ACM100 C
ACM200
M
ACM300
Stainless
Steel P
P ACM100 Milling Cutters
ACM200
S C
Exotic ACM300
Alloy
P
Coating Type: C CVD
P PVD
P ACM100/ACM300 C ACM200
60 New Super ZX Coat
50 Super ZX Coat
40 ZX Coat
30 TiCN
TiAlN
20 TiN
Coating Hardness (GPa) Super FF Coat Coating hardness
TiCN Coating Hardness (GPa) 30% increase.
Laminating 50 Coating surface Al2O3
cycle to roughness
~10nm
40 50% reduction.
30 TiCN
20 Conventional Coating
600 800 1000 1.200 Cross Section 0,05 0,10 0,15 0,20 Substrate
Starting Temperature for Oxidation (°C) of Coating TiCN Surface Roughness Ra (µm)
Cross Section
of Coating
New Super ZX Coat Super FF Coat
The product series with a coating film hardness appro- Smooth coating surface provides excellent adhesion
ximately 40% higher and an oxidation onset temperature and chipping resistance.
200°C higher than conventional products. Improved coating adhesion strength.
Enables machining at least 1,5 times faster and more Harder than conventional coatings with hugh impro-
efficiently than conventional products. vements in wear resistance.
A product life at least twice as long as that of conventi- High speed, high effiency machining of more than 1,5
onal products achieved under the same machining con- times than of conventional grades possible.
ditions. Achieving more than double the tool life of conventional
grades under the same cutting conditions.
www.sumitomo-tools.ru G21
для заказа - sumitomo@sumitomo-tools.ru