Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
”Wave Face Mill”
WGX (M/F) Type
General Features
The Wavemill WGX Type employs unique chipbreaker de-
sign to provide lower cutting resistance and higher quality
surface finishes than conventional tools.
Series
Type Cat. No. Cutter No. of Teeth
Standard Pitch
Medium Pitch WGX 13000RS 40 ~ 250 3 ~ 10
Fine Pitch
Endmill Type WGXM 13000RS 50 ~ 250 4 ~ 14
WGXF 13000RS 50 ~ 250 5 ~ 24
WGX 13000EW 32 ~ 63 3 ~ 5
Characteristics Inner coolant available for Dc 125mm
l Stable Cutting
Special chipbreaker designed for WGX enables lower cutting forces.
l High Quality
Improved run-out precision and unique wiper edge shape ensure excellent surface finish quality.
Optimised chamfer edge reduces burr and edge chipping.
l Long Tool Life
Features high precision technology that reduces insert run-out variation and a new coating to provide stable and long
tool life.
Insert Shape Characteristics
Unique wiper edge shape for improved surface roughness
General-purpose
G type chipbreaker
Low-burr design Optimal nose Large rake angle and cutting Milling Cutters
FG type chipbreaker radius edge rake angle improves
for high strength cutting edge sharpness
Optimised chamfer shape
reduces burrs on cutting
surface
Inserts Coated Carbide Carb. DLC Fig. 1
Application P K MS KN N
High Speed/Light Cut
PM M K MS MS N
General Purpose
Roughing PM PM K MS
ACP100 Seat Screw Seat
ACP200 Insert
Cat. No. ACP300 Fig. Fig. 2
ACK200
ACK300
ACM200
ACM300
H1
DL1000
SEET 13T3AGFR-L mm 1
New SEET 13T3AGSR-L 1 Insert
SEET 13T3AGSR-G 1 Screw
SEMT 13T3AGSR-L 1 Fig. 3
SEMT 13T3AGSR-G 1
SEMT 13T3AGSR-H 1
SEMT 13T3AGSR-FG 2
New XEEW 13T3AGER-WR 3
Recommended Cutting Conditions
Spare Parts ISO Work Material Hardness Cutting Speed Feed Rate Grade
vc (m/min) ft (mm/tooth)
Applicable Seat Seat Insert Insert Torque Seat General Steel 180~280HB 150-200-250 0,15-0,20-0,25 ACP200
Cutters Screw Screw Wrench (N.m) Wrench
P Soft Steel 180HB 180-265-350 0,10-0,25-0,40 ACP200
Die Steel 200~220HB 100-150-200 0,15-0,20-0,25 ACP200
M Stainless Steel - 160-205-250 0,15-0,23-0,30 ACM300
K Cast Iron 250HB 100-175 -250 0,15-0,23-0,30 ACK200
WGX (-M/F) WGCS 13 R BW 0507 F BFTX 03512 IP TRDR 15 IP 3,0 LH 035 N Non Ferrous Alloy - 500-750-1000 0,15-0,23-0,30 DL1000
S Exotic Alloy - 30 - 50- 80 0,10-0,20-0,30 ACM300
Minimum-Optimum-Maximum
www.sumitomo-tools.ru G11
для заказа - sumitomo@sumitomo-tools.ru