Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
”Sumi Dual Mill”
DGC Type
Inserts New
Application Coated Carbide
High Speed/Light cut
P K MS Fig. 1 Fig. 2
General Purpose
Roughing PM M K MS
Cat. No. PM PM K MS
ACP100 Fig.
ACP200
ACP300
ACK200
ACK300
ACM200
ACM300
SNMU 13T6ANER L 1
SNMU 13T6ANER G 1
SNMU 13T6ANER H 1
SNMU 13T6ANER FL 2 Fig. 3 Fig. 4
SNMU 13T6ANER FG 2
SNEU 13T6ANER L 1
SNEU 13T6ANER G 1
SNEU 13T6ANER FL 2
SNEU 13T6ANER FG 2
XNEU 13T6ANER W 3
ONMU 05T6ANER L 4
ONMU 05T6ANER G 4
ONEU 05T6ANER L 4
ONEU 05T6ANER G 4
Chipbreaker Improved Milling Quality
Good New FG type chipbreakers feature chamfer to minimize burrs and provide excellent
milling qualitiy.
FL L
New Low burr FG Competitor
Light design
FG G
cutting Light FG With
with cutting Low chamfer
Edge Sharpness low burr burr General No burrs Burrs
design purpose H
FG type inserts with low-burr design enable Milling Cutters
standard Heavy high-qualitiy milling with few burrs and little edge
cutting chipping.
Edge Strength High
Attaching Inserts Shim Screw Octagonal Inserts Press down firmly from above
Shim
Insert Firmly align insert with Align with
supporting face, press down supporting
Insert Screw in the direction of the arrow faces
and tighten the screw to fix
the insert.
Spare Parts Optional
Shim Shim Screw L Type Wrench Insert Srew Spanner Insert Srew (*)
3,0
DGCS13R BW0609F LH040 BFTX0412IP TRDR15IP BFTX0418IP
*Corners can be changed simply by loosening the screw. (Only suitable for DGC / DGCM types with body size 80).
Recommended Cutting Conditions (SN_U) Recommended Cutting Conditions (ON_U)
ISO Work Fit- Cutting Speed Feed Rate Depth ISO Work Fit- Cutting Speed Feed Rate Depth
Material ness vc (m/min) ft (min/t) of Cut Grade Material ness vc (m/min) ft (min/t) of Cut Grade
(mm) (mm)
General 150-200-250 0,10-0,25-0,40 <4 ACP200 General 150-200-250 0,10-0,30-0,50 <2 ACP200
Steel ACP300 Steel ACP300
P Alloyed 180-250-350 0,10-0,30-0,45 <4 ACP200 P Alloyed 180-250-350 0,10-0,50-0,50 <2 ACP200
Steel ACP300 Steel ACP300
Die Steel 100-150-200 0,15-0,25-0,35 <4 ACP200 Die Steel 100-150-200 0,15-0,25-0,30 <2 ACP200
160-200-250 0,15-0,23-0,30 <3 ACP300 160-200-250 0,15-0,23-0,30 <2 ACP300
M Stainless 100-200-250 0,10-0,25-0,40 <5 M Stainless 100-200-250 0,10-0,30-0,50 <2
Steel ACM200 Steel ACM200
ACM300 ACM300
K GG+GGG ACP300 K GG+GGG ACP300
ACK200 ACK200
ACK300 ACK300
Min. – Optimum – Max. Preferred choice Suitable
www.sumitomo-tools.ru G9
для заказа - sumitomo@sumitomo-tools.ru