Sumitomo - Полный каталог инструмента - 2016 EN
для заказа - sumitomo@sumitomo-tools.ru
”Sumi Dual Mill”
DGC(M/F) Type
Line-up
Choose a tool that fits your application from a comprehensive line-up
Cat. No DGC 13000 RS DGCM 13000 RS DGCF 13000 RS DGC 13000 EW
Endmill type
Type Standard pitch Medium pitch Fine pitch
40mm ~ 250mm 50mm ~ 250mm 50mm ~ 250mm 40mm ~ 63mm
Cutter 3~4
Diameter 3 ~ 10 4 ~ 14 5 ~ 18
Cutting
Edges
Shape
High Reliability
Employs New Super ZX Coating, a multi-layer PVD coating grade and CVD coating grade with enhanced
coating strength provided by newly developed stress control technology.
Improved run-out precision reduces tool life deviation to achieve highly reliable tool life.
Multi-layer PVD Coating Wear Resistance
Coating Hardness (GPa) 60 New Super ZX Coat Flank Wear (mm) 0,30 Comp. B Comp. A Work Material: Milling Cutters
0,25 Small wear only 34CrMo4
50 Super ZX Coat 0,20 DGC
0,15 Tool:
40 0,10 100mm
ZX Coat 0,05
Cutting Data:
30 TiCN 0 vc = 200m/min
TiAlN ft = 0,15mm/t
doc = 2mm
20 TiN woc = 85mm
0 600 800 1000 2000 1 3 5 10 20 25
Starting Temp. for Oxidization (°C) Number of Passes (1 Pass = 300mm)
Cutter Diameter and Cutter Body Height
Insert: SN_U 13T6 ANER (square) Insert: ON_U 05T6 ANER (octagonal)
63,0mm
61,4mm
100,0mm 102,9mm
Example: Number of Tool Diameter Cutter Height Max. Depth Square inserts (SNMU/SNEU) and
Dc = 100mm octagonal inserts (ONMU/ONEU)
Cutting Edges (mm) (mm) of Cut (mm) can be used interchangeably on the
SNMU / SNEU same body.
8 100,0 63,0 6,0 Using these inserts the cutter will have
ONMU / ONEU different cutter diameter and cutter
16 102,9 61,4 3,0 body height.
www.sumitomo-tools.ru G7
для заказа - sumitomo@sumitomo-tools.ru