Sumitomo - Полный каталог инструмента - 2016 EN

                                для заказа - sumitomo@sumitomo-tools.ru

                                                      Milling Insert

                                             ISO Identification Table

                 Thickness                            Corner geometry with wiper flat                               Radius

                02 s = 2,38 mm                          Entering angle              Clearance angle            02 r = 0,2 mm
                03 s = 3,18                           Feed direction                  on wiper flat            04 r = 0,4
                T3 s = 3,97                                                                                    08 r = 0,8
                04 s = 4,76                                                  1      A	3°                       12 r = 1,2
                05 s = 5,56                                  4                      B	5°                       16 r = 1,6
                06 s = 6,35                                                         C	7°                       20 r = 2,0
                07 s = 7,94                                          32             D	15°                      24 r = 2,4
                09 s = 9,52                                                         E	20°
                                                         A	45°                      F	25°                   M0 - Round insert
                                                         D	60°                      G	30°                   	(metric)
                                                         E	75°                      N	0°                    00 - Round insert
                                                         F	 85°                     P	11°                   	(inch)
                                                         P	90°
                                                         Z	-	Others                 Z	- Others

                                                      1. Major cutting edge
                                                      2. Chamfered corner
                                                      3. Wiper flat
                                                      4. Side cutting edge

         1 3 T 3 AGSR                                                                                                          Milling Cutters

                                Insert size                                         Cutting edge condition       Feed direction
                Symbol and cutting edge length (mm)                                                                             Right hand
                                                                                     F
        Insert                                                                                                         Neutral
          type                                                                                   Sharp      Left hand

IC                                                                                   E                                         G5

d (mm)                                                                                         Rounded

	3,97					 06 (6,9)                                                                  T

	4,76					 08 (8,2)                                                                           Chamfered

	5,0			 05 (5,0)                                                                     S

	5,56					 09 (9,6)	 09 (9,7)	 03 (3,8)                                                     Rounded and
                                                                                                chamfered
	6,0			 06 (6,0)

	6,35	 06 (6,4)	 07 (7,7)		06 (6,35)	 11 (11,0)	 11 (11,1)	 04 (4,3)

	7,94	 08 (8,0)			07 (7,94)			05 (5,4)

	8,0			 08 (8,0)

	9,525	 09 (9,7)	 11 (11,6)	 09(9,525)	 09 (9,525)	 16 (16,5)	 16 (16,6)	 06 (6,5)

	10			 10 (10,0)

	12			 12 (12,0)

	 12,7	         12 (12,9)	 15 (15,5)	 12 (12,7)	 12 (12,7)	 22 (22,0)		 08 (8,7)

	15,875	 16 (16,1)	 19 (19,4)	 15(15,875)	 15 (15,875)	 27 (27,5)		10 (10,9)

	16			 16 (16,0)

	19,05	 19 (19,3)		19 (19,05)	 19 (19,05)	 33 (33,0)

	20			 20 (20,0)

	25			 25 (25,0)

	25,4			 25 (25,4)	 25 (25,4)

	31,75			 31(31,75)	 31(31,75)

	32			 32 (32,0)

                                             www.sumitomo-tools.ru
                                для заказа - sumitomo@sumitomo-tools.ru